您当前的位置:JZ5U绿色下载站文章中心设计学院Photoshop → 文章内容
  • Sublime Text 2 设置方法 使用教程

Sublime Text 2是那种让人会一眼就爱上的编辑器,不只GUI让人眼前一亮,功用更是没的说,拓展性目前来说也完整够用了,网上引见软件的文章和引荐插件的文章也不少,而且很不错,大家能够去找找本人需求的。而且 Linux 支持也做的十分好。

Sublime Text 2中文版下载

之前想设置什么都是直接在网上搜,但最近想调行距,这个把我给难住了,软件上的设置没找到,网上搜也没有,最后的最后在Sublime的官方论坛找到了,个人觉得行距还是很影响视觉体验的,看看下面的比照图就晓得了:

看来想驾驭好这软件不弄分明配置文件是不行了,周末找了时间把配置文件的每条配置信息都加上了中文注释,如今贴出来和大家共享,里面有解释不分明的也欢送大家伙来相互讨论:)

另外,这也是我的第一篇博客,以后我会多写些前端方面的文章和大家共享,欢送一同讨论:)

Preferences.sublime-settings文件:

// While you can edit this file, it’s best to put your changes in
// “User/Preferences.sublime-settings”, which overrides the settings in here.
//
// Settings may also be placed in file type specific options files, for
// example, in Packages/Python/Python.sublime-settings for python files.
{
// Sets the colors used within the text area
// 主题文件的途径
“color_scheme”: “Packages/Color Scheme – Default/Monokai.tmTheme”,

// Note that the font_face and font_size are overriden in the platform
// specific settings file, for example, “Preferences (Linux).sublime-settings”.
// Because of this, setting them here will have no effect: you must set them
// in your User File Preferences.
// 设置字体和大小,必需在Settings-User里重写,这里设置没有任何效果
“font_face”: “Consolas”,
“font_size”: 12,

// Valid options are “no_bold”, “no_italic”, “no_antialias”, “gray_antialias”,
// “subpixel_antialias” and “no_round” (OS X only)
// 字体选项:no_bold不显现粗体字,no_italic不显现斜体字,no_antialias和no_antialias关闭反锯齿
// subpixel_antialias和no_round是OS X系统独有的
“font_options”: [],

// Characters that are considered to separate words
// 在文字上双击会全选当前的内容,假如里面呈现以下字符,就会被截断
“word_separators”: “./\\()\”‘-:,.;<>~!@#$%^&*|+=[]{}`~?”,

// Set to false to prevent line numbers being drawn in the gutter
// 能否显现行号
“line_numbers”: true,

// Set to false to hide the gutter altogether
// 能否显现行号边栏
“gutter”: true,

// Spacing between the gutter and the text
// 行号边栏和文字的间距
“margin”: 4,

// Fold buttons are the triangles shown in the gutter to fold regions of text
// 能否显现代码折叠按钮
“fold_buttons”: true,

// Hides the fold buttons unless the mouse is over the gutter
// 不论鼠标在不在行号边栏,代码折叠按钮不断显现
“fade_fold_buttons”: true,

// Columns in which to display vertical rulers
//列显现垂直标尺,在中括号里填入数字,宽度按字符计算
“rulers”: [],

// Set to true to turn spell checking on by default
// 能否翻开拼写检查
“spell_check”: false,

// The number of spaces a tab is considered equal to
// Tab键制表符宽度
“tab_size”: 4,

// Set to true to insert spaces when tab is pressed
// 设为true时,缩进和遇到Tab键时运用空格替代
“translate_tabs_to_spaces”: false,

// If translate_tabs_to_spaces is true, use_tab_stops will make tab and
// backspace insert/delete up to the next tabstop
// translate_tabs_to_spaces设置为true,Tab和Backspace的删除/插入作用于制表符宽度
// 否则作用于单个空格
“use_tab_stops”: true,

// Set to false to disable detection of tabs vs. spaces on load
// false时制止在载入的时分检测制表符和空格
“detect_indentation”: true,

// Calculates indentation automatically when pressing enter
// 按回车时,自动与制表位对齐
“auto_indent”: true,

// Makes auto indent a little smarter, e.g., by indenting the next line
// after an if statement in C. Requires auto_indent to be enabled.
//针对C言语的
“smart_indent”: false,

// Adds whitespace up to the first open bracket when indenting. Requires
// auto_indent to be enabled.
// 需求启用auto_indent,第一次翻开括号缩进时插入空格?(没测试出来效果…)
“indent_to_bracket”: true,

// Trims white space added by auto_indent when moving the caret off the
// line.
// 显现对齐的白线能否依据回车、tab等操作自动填补
“trim_automatic_white_space”: true,

// Disables horizontal scrolling if enabled.
// May be set to true, false, or “auto”, where it will be disabled for
// source code, and otherwise enabled.
// 能否自动换行,假如选auto,需求加双引号
“word_wrap”: false,

// Set to a value other than 0 to force wrapping at that column rather than the
// window width
// 设置窗口内文字区域的宽度
“wrap_width”: 0,

// Set to false to prevent word wrapped lines from being indented to the same
// level
// 避免被缩进到同一级的字换行
“indent_subsequent_lines”: true,

// Draws text centered in the window rather than left aligned
// 假如没有定义过,则文件居中显现(比方新建的文件)
“draw_centered”: false,

// Controls auto pairing of quotes, brackets etc
// 自动匹配引号,括号等
“auto_match_enabled”: true,

// Word list to use for spell checking
// 拼写检查的单词列表途径
“dictionary”: “Packages/Language – English/en_US.dic”,

// Set to true to draw a border around the visible rectangle on the minimap.
// The color of the border will be determined by the “minimapBorder” key in
// the color scheme
// 代码地图的可视区域局部能否加上边框,边框的颜色可在配色计划上参加minimapBorder键
“draw_minimap_border”: false,

// If enabled, will highlight any line with a caret
// 突出显现当前光标所在的行
“highlight_line”: false,

// Valid values are “smooth”, “phase”, “blink”, “wide” and “solid”.
// 设置光标闪动方式
“caret_style”: “smooth”,

// Set to false to disable underlining the brackets surrounding the caret
// 能否特殊显现当前光标所在的括号、代码头尾闭合标志
“match_brackets”: true,

// Set to false if you’d rather only highlight the brackets when the caret is
// next to one
// 设为false时,只要光标在括号或头尾闭合标志的两端时,match_brackets才生效
“match_brackets_content”: true,

// Set to false to not highlight square brackets. This only takes effect if
// match_brackets is true
// 能否突出显现圆括号,match_brackets为true生效
“match_brackets_square”: false,

// Set to false to not highlight curly brackets. This only takes effect if
// match_brackets is true
// 能否突出显现大括号,match_brackets为true生效
“match_brackets_braces”: false,

// Set to false to not highlight angle brackets. This only takes effect if
// match_brackets is true
// 能否突出显现尖括号,match_brackets为true生效
“match_brackets_angle”: false,

// Enable visualization of the matching tag in HTML and XML
// html和xml下突出显现光标所在标签的两端,影响HTML、XML、CSS等
“match_tags”: true,

// Highlights other occurrences of the currently selected text
// 全文突出显现和当前选中字符相同的字符
“match_selection”: true,

// Additional spacing at the top of each line, in pixels
// 设置每一行到顶部,以像素为单位的间距,效果相当于行距
“line_padding_top”: 1,

// Additional spacing at the bottom of each line, in pixels
// 设置每一行到底部,以像素为单位的间距,效果相当于行距
“line_padding_bottom”: 1,

// Set to false to disable scrolling past the end of the buffer.
// On OS X, this value is overridden in the platform specific settings, so
// you’ll need to place this line in your user settings to override it.
// 设置为false时,滚动到文本的最下方时,没有缓冲区
“scroll_past_end”: true,

// This controls what happens when pressing up or down when on the first
// or last line.
// On OS X, this value is overridden in the platform specific settings, so
// you’ll need to place this line in your user settings to override it.
// 控制向上或向下到第一行或最后一行时发作什么(没明白也没试出来)
“move_to_limit_on_up_down”: false,

// Set to “none” to turn off drawing white space, “selection” to draw only the
// white space within the selection, and “all” to draw all white space
// 按space或tab时,实践会产生白色的点(一个空格一个点)或白色的横线(tab_size设置的制表符的宽度),选中状态下才干看到
// 设置为none时,什么状况下都不显现这些点和线
// 设置为selection时,只显现选中状态下的点和线
// 设置为all时,则不断显现
“draw_white_space”: “selection”,

// Set to false to turn off the indentation guides.
// The color and width of the indent guides may be customized by editing
// the corresponding .tmTheme file, and specifying the colors “guide”,
// “activeGuide” and “stackGuide”
// 制表位的对齐白线能否显现,颜色可在主题文件里设置(guide,activeGuide,stackGuide)
“draw_indent_guides”: true,

// Controls how the indent guides are drawn, valid options are
// “draw_normal” and “draw_active”. draw_active will draw the indent
// guides containing the caret in a different color.
// 制表位的对齐白线,draw_normal为不断显现,draw_active为只显现当前光标所在的代码控制域
“indent_guide_options”: ["draw_normal"],

// Set to true to removing trailing white space on save
// 为true时,保管文件时会删除每行完毕后多余的空格
“trim_trailing_white_space_on_save”: false,

// Set to true to ensure the last line of the file ends in a newline
// character when saving
// 为true时,保管文件光阴标会在文件的最后向下换一行
“ensure_newline_at_eof_on_save”: false,

// Set to true to automatically save files when switching to a different file
// or application
// 切换到其它文件标签或点击其它非本软件区域,文件自动保管
“save_on_focus_lost”: false,

// The encoding to use when the encoding can’t be determined automatically.
// ASCII, UTF-8 and UTF-16 encodings will be automatically detected.
// 编码时不能自动检测编码时,将自动检测ASCII, UTF-8 和 UTF-16
“fallback_encoding”: “Western (Windows 1252)”,

// Encoding used when saving new files, and files opened with an undefined
// encoding (e.g., plain ascii files). If a file is opened with a specific
// encoding (either detected or given explicitly), this setting will be
// ignored, and the file will be saved with the encoding it was opened
// with.
// 默许编码格式
“default_encoding”: “UTF-8″,

// Files containing null bytes are opened as hexadecimal by default
// 包含空字节的文件被翻开默许为十六进制
“enable_hexadecimal_encoding”: true,

// Determines what character(s) are used to terminate each line in new files.
// Valid values are ‘system’ (whatever the OS uses), ‘windows’ (CRLF) and
// ‘unix’ (LF only).
// 每一行完毕的时分用什么字符做终止符
“default_line_ending”: “system”,

// When enabled, pressing tab will insert the best matching completion.
// When disabled, tab will only trigger snippets or insert a tab.
// Shift+tab can be used to insert an explicit tab when tab_completion is
// enabled.
// 设置为enabled时,在一个字符串间按Tab将插入一个制表符
// 设置为true时,按Tab会依据前后环境停止代码自动匹配填补
“tab_completion”: true,

// Enable auto complete to be triggered automatically when typing.
// 代码提示
“auto_complete”: true,

// The maximum file size where auto complete will be automatically triggered.
// 代码提示的大小限制
“auto_complete_size_limit”: 4194304,

// The delay, in ms, before the auto complete window is shown after typing
// 代码提示延迟显现
“auto_complete_delay”: 50,

// Controls what scopes auto complete will be triggered in
// 代码提示的控制范围
“auto_complete_selector”: “source – comment”,

// Additional situations to trigger auto complete
// 触发代码提示的其他状况
“auto_complete_triggers”: [ {"selector": "text.html", "characters": "<"} ],

// By default, auto complete will commit the current completion on enter.
// This setting can be used to make it complete on tab instead.
// Completing on tab is generally a superior option, as it removes
// ambiguity between committing the completion and inserting a newline.
// 设为false时,选择提示的代码按回车或点击能够输出出来,但选择true时不会输出而是直接换行
“auto_complete_commit_on_tab”: false,

// Controls if auto complete is shown when snippet fields are active.
// Only relevant if auto_complete_commit_on_tab is true.
// auto_complete_commit_on_tab必需为true,控制代码提示的活泼度(没明白…)
“auto_complete_with_fields”: false,

// By default, shift+tab will only unindent if the selection spans
// multiple lines. When pressing shift+tab at other times, it’ll insert a
// tab character – this allows tabs to be inserted when tab_completion is
// enabled. Set this to true to make shift+tab always unindent, instead of
// inserting tabs.
// 设置为false,运用Shift + tab总是插入制表符
“shift_tab_unindent”: true,

// If true, the selected text will be copied into the find panel when it’s
// shown.
// On OS X, this value is overridden in the platform specific settings, so
// you’ll need to place this line in your user settings to override it.
// 选中的文本按Ctrl + f时,自动复制到查找面板的文本框里
“find_selected_text”: true,

//
// User Interface Settings
//

// The theme controls the look of Sublime Text’s UI (buttons, tabs, scroll bars, etc)
// Data\Packages\Theme – Default\Default.sublime-theme控制软件的主题
“theme”: “Default.sublime-theme”,

// Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to
// scroll slower, or set to larger than 1 to scroll faster
// 滚动的速度
“scroll_speed”: 1.0,

// Controls side bar animation when expanding or collapsing folders
// 左边边栏文件夹动画
“tree_animation_enabled”: true,
// 标签页的关闭按钮
“show_tab_close_buttons”: true,

// OS X 10.7 only: Set to true to disable Lion style full screen support.
// Sublime Text must be restarted for this to take effect.
// 针对OS X
“use_simple_full_screen”: false,

// Valid values are “system”, “enabled” and “disabled”
// 程度垂直滚动条:system和disabled为默许显现方式,enabled为自动躲藏显现
“overlay_scroll_bars”: “system”,

//
// Application Behavior Settings
//

// Exiting the application with hot_exit enabled will cause it to close
// immediately without prompting. Unsaved modifications and open files will
// be preserved and restored when next starting.
//
// Closing a window with an associated project will also close the window
// without prompting, preserving unsaved changes in the workspace file
// alongside the project.
// 热推出功用!退出时不会提示能否保管文件,而是直接退出
// 下次翻开软件时,文件坚持退出前的状态,没来得及保管的内容都在,但并没有真实的写在原文件里
“hot_exit”: true,

// remember_open_files makes the application start up with the last set of
// open files. Changing this to false will have no effect if hot_exit is
// true
// 软件运用最后的设定翻开文件,hot_exit为true时没有效果
“remember_open_files”: true,

// OS X only: When files are opened from finder, or by dragging onto the
// dock icon, this controls if a new window is created or not.
// 针对OS X
“open_files_in_new_window”: true,

// Set to true to close windows as soon as the last file is closed, unless
// there’s a folder open within the window. This is always enabled on OS X,
// changing it here won’t modify the behavior.
// 针对OS X
“close_windows_when_empty”: true,
// 哪些文件会被显现到边栏上
// folder_exclude_patterns and file_exclude_patterns control which files
// are listed in folders on the side bar. These can also be set on a per-
// project basis.
“folder_exclude_patterns”: [".svn", ".git", ".hg", "CVS"],
“file_exclude_patterns”: ["*.pyc", "*.pyo", "*.exe", "*.dll", "*.obj","*.o", "*.a", "*.lib", "*.so", "*.dylib", "*.ncb", "*.sdf", "*.suo", "*.pdb", "*.idb", ".DS_Store", "*.class", "*.psd", "*.db"],
// These files will still show up in the side bar, but won’t be included in
// Goto Anything or Find in Files
“binary_file_patterns”: ["*.jpg", "*.jpeg", "*.png", "*.gif", "*.ttf", "*.tga", "*.dds", "*.ico", "*.eot", "*.pdf", "*.swf", "*.jar", "*.zip"],

// List any packages to ignore here. When removing entries from this list,
// a restart may be required if the package contains plugins.
// 删除你想要疏忽的插件,需求重启
“ignored_packages”: ["Vintage"]
}



  • 作者:互联网  来源:本站整理  发布时间:2019-11-21 14:24:57


------------------------------- · 相关文档浏览 · --------------------------------------------------------------------- · 热门文档浏览 · -------------------------------------